One of the biggest challenges for off-grid tiny homes is finding a reliable water source. Even if you find a lake or well, drawing up the water can be a tiring job. That’s when water pumps come into play – they transport pressurized water from the source into the tiny house so that you can use it for showering, cooking, cleaning the dishes, and more.
So what is the best water pump for tiny house? We’ve rounded up the eight best water pumps among hundreds of options to choose from:
- Camplux JK-2202 12-Volt Water Pump
- Shurflo 2088-554-144 Fresh Water Pump
- Bayite BYT-7A102 Freshwater Pressure Diaphragm Pump
- Amarine Made FLO-2202 12-Volt Water Pressure Diaphragm Pump
- Lippert 689052 12V Flow Max Water Pump
- Seaflo 21 Series Water Pressure Pump
- Flojet 03526-144A Triplex Diaphragm Automatic Water System Pump
- Remco Aquajet RV Series Water Pump
Just a quick note…any link on this page that leads to a product on Amazon is an affiliate link. We earn a small commission if you make a purchase. By doing this, you're supporting this website — thank you so much.
8 Best Water Pumps for Tiny Homes
Camplux JK-2202 12-Volt Water Pump
Why You Should Get It: For a lightweight water pump with a low noise level.
|This pump was made using rubber that can absorb noise and vibrations better than the typical rigid plastic of other pumps.||Because of the built-in thermal protector, the pump needs to cool down for 15-20 minutes after continuously running for 60-90 minutes.|
|It’s designed to be simple so anyone can install it without calling a plumber for help.||Since this pump can only transfer pressurized water, you might need to buy a separate shower pump and water heater to increase the pressure and temperature during bath time.|
This CE-certified water pump introduced by Camplux is perfect for a typical house plumbing system that circulates water around a tiny house. Since it is made of rubber, the pump can absorb vibrations better, producing less noise compared to other water pumps.
There’s no need to call a mechanic because installing this device is also easy – it can be conveniently placed above a tank. It is also marked with arrows that indicate which side is for water inlet or outlet.
|Product Name||Camplux 12V Water Pump Diaphragm for Caravan RV Marine Fishing Boat|
|Dimensions||8.95” x 4.35” x 2.7”|
|Flow Rate||1.2 gallons per minute|
|Average Amazon Score||4.4|
Shurflo 2088-554-144 Fresh Water Pump
Why You Should Get It: If you’re looking for a water pump that can be installed either horizontally or vertically in a tiny home grid water system.
|The product includes a 1-year warranty that includes manufacturing defects.||To reduce the noise created when the pump is turned on, ensure that the water lines are wrapped in foam.|
|The flow rate (3.5 GPM) is higher than most pumps available in the market.||Make sure to install the pump onto the tank properly to avoid severe water leakage|
Shurflo produces some of the high-quality water pumps you can buy online, but this particular model might be their best one yet. Shurflo 2088-554-144 is a lightweight pump that features a high flow rate of 3.5 GPM. The motor is also thermally protected so there’s no need to worry about overheating.
Installing this water device is also a breeze – just follow the instructions to keep the grid water running anytime you need it. Shurflo also offers a 1-year warranty to its customers who received defective pumps.
|Product Name||Shurflo 2088-554-144 Fresh Water Pump|
|Dimensions||10.4” X 7.4” x 5.6”|
|Flow Rate||3.5 gallons per minute|
|Average Amazon Score||4.6|
Bayite BYT-7A102 Freshwater Pressure Diaphragm Pump
Why You Should Get It: For when you live in an area with high humidity conditions.
|The pump can maintain constant operations even in humid conditions thanks to the corrosion-inhibiting electro coating and sealed switch.||Ensure that the water pump won’t be submerged in water so that it can continue to function normally.|
|It includes a built-in thermal breaker to keep the water pump from overheating.||When installing the pump, you should pour water into the hose connected to the pump to get it primed.|
Bayite BYT-7A102 is the best pump if you’re only looking for one that can perform basic functions. Although it can only produce 1 gallon per minute, it is still handy for several setups like garden sprinkles, water taps, showers, and more. Water heaters are sold separately, but it would certainly go well with the pressurized water from this pump.
Lots of satisfied customers also mentioned that integrating the pump into the house plumbing takes only about 15 minutes or less. You can also enjoy years of quiet operation in the tiny home once bayite BYT-7A102 has been installed on the tank correctly.
|Product Name||Bayite BYT-7A102 12V DC Freshwater Pressure Diaphragm Pump with Hose Clamps Self Priming Sprayer Pump with Pressure Switch for RV Camper Marine Boat|
|Dimensions||6.10” x 3.94” x 2.36”|
|Flow Rate||1.0 gallon per minute|
|Average Amazon Score||4.3|
Amarine Made FLO-2202 12-Volt Water Pressure Diaphragm Pump
Why You Should Get It: When you’re looking for an affordable and energy-efficient water pump perfect for house plumbing.
|It can provide the same results as other water pumps for a lower price.||The pump should be installed correctly to ensure that it won’t produce much noise when turned on.|
|This pump is an energy-efficient pump that can help conserve power and cut down electric bills.||To prevent the pump from overheating, let it cool down for about 20 minutes after an hours-long operation before turning it on again.|
If your budget is still tight after spending money on other tiny house appliances, Amarine Made FLO-2202 can pump water to your tiny house while saving a little more cash. This portable pump can supply 1.1 gallons of water per minute with a pressure limit of 35 PSI.
Although it can only perform simple tasks of transferring water to the house, many tiny home dwellers and RV owners commend this pump for its endurance. If installed onto the tank properly, this pump can last years without needing replacement.
|Product Name||Amarine Made FLO-2202 12V Water Pressure Diaphragm Pump|
|Dimensions||7.48” x 4.33” x 2.76”|
|Flow Rate||1.1 gallons per minute|
|Average Amazon Score||4.3|
Lippert 689052 12V Flow Max Water Pump
Why You Should Get It: If you need the best heavy-duty pump that can run dry without incurring serious damages.
|This pump has a high flow rate of 3 gallons per minute with a pressure of 50 PSI.||Some of the hardware needed to install this pump has to be bought separately.|
|It is durable enough to function normally even if installed and exposed outside the tiny house.||Leaks at the connections might occur if the pump is not properly mounted on the tank.|
Need a water pump for outdoors and has a great flow rate? Lippert 689052 is perfect for that. With a pressure of 50 PSI and a flow rate of 3 gallons per minute, all the taps at the tiny house will be supplied with water even when opened simultaneously. It’s also corrosion-resistant and can be installed outside.
A bolt-on model like this water pump is also easy to set up. However, you might need to buy sturdier materials during installation to ensure that the pump will be attached to the tank for a long time.
|Product Name||Lippert Components 12V Flow Max Water Pump (689052)|
|Dimensions||10.5” x 6.0” x 5.5”|
|Flow Rate||3.0 gallons per minute|
|Average Amazon Score||4.5|
Seaflo 21 Series Water Pressure Pump
Why You Should Get It: It’s a budget-friendly pump that can perform a wide range of applications.
|The water pump is backed by a 4-year warranty.||With light use, the pump can remain fully functional for a long time.|
|It includes an automatic switch to turn off the pump when the right values for pressure are achieved.||Ensure that the pump is properly mounted to prevent possible leakage.|
With a flow rate of 1.2 gallons per minute, the Seaflo 21-series pump can perform basic tasks in tiny homes like filtration, liquid transfer, dispensing, and spraying. It also works well even when the tank’s supply is low.
The best thing about this water pump is the 4-year warranty that covers manufacturing defects. The installation also won’t be a problem because it comes with soft rubber mounts for a noise-free attachment to the tank.
|Product Name||Seaflo 12V Water Pressure Diaphragm Pump|
|Dimensions||7.0” x 4.1” x 2.3”|
|Flow Rate||1.2 gallons per minute|
|Average Amazon Score||4.1|
Flojet 03526-144A Triplex Diaphragm Automatic Water System Pump
Why You Should Get It: When you need a constant water supply for your shower and toilet.
|This pump utilizes three chambers to deliver the optimal water flow to taps, toilets, and showers.||It needs to cool down for a few minutes after running for long periods.|
|It is one of the most energy-efficient water pumps available in the market.||Proper installment is required to fully eliminate the noises created when the pump is on.|
Aside from providing 2.9 gallons per minute, the best feature of this water pump is the three-chamber diaphragm design that allows up to 9 ft. suction lift and optimal water flow to different parts of the tiny home. But to enjoy a hot shower, a water heater must be purchased first.
Since the pump comes with a complete installation kit, there’s no need to call a mechanic to mount it on the tank. The self-priming feature also allows top-notch performance the moment it is turned on.
|Product Name||Flojet 03526-144A Triplex Diaphragm Automatic Water System Pump|
|Dimensions||9.0” x 4.0” x 4.0”|
|Flow Rate||2.9 gallons per minute|
|Average Amazon Score||4.6|
Remco Aquajet RV Series Water Pump
Why You Should Get It: For a water pump that has an impressive flow rate and high shut-off capacity for pressurized water.
|It includes pressure sensors that can detect water pressure drops to ensure consistent flow.||Ensure that the PVC pipes at the tiny home can keep up with the pump’s extremely high pressure.|
|The manufacturer offers a two-year warranty for this water pump.||The pump should only be run at a moderate volume to prevent the device from vibrating extensively.|
Remco Aquajet RV Series Water Pumps is designed with state-of-the-art electronics to optimize its operation for different uses. It also features a 5-chamber design to deliver up to 5 gallons per minute. For the best experience, buy one water heater along with this pump.
The Remco Aquajet pump comes with a detailed user manual to help customers install it on a tank. The guide also includes directions for troubleshooting and more to help you work your way through extensive tiny house plumbing systems and grid water filtration systems.
|Product Name||Remco 55-AQUAJET ARV Aquajet RV Series Water Pump|
|Dimensions||12.3” x 6.2” x 5.4”|
|Flow Rate||5.0 gallons per minute|
|Average Amazon Score||4.0|
What to Look for in a Water Pump
Picking out a water pump for a tiny home isn’t as exciting as selecting a couch for the living room. But it’s an essential part of your tiny home because it provides water supply without putting you through the trouble of filling up a bucket and carrying it all the way to the tiny house.
Before you start selecting a water pump for a tiny home, here are the factors to consider:
- Flow Rate – Typically measured in gallons per minute, the flow rate is the time it takes for the pump to deliver a certain amount of water where it is needed. For tiny home use, the minimum flow rate should be 1.0 gallon per minute.
- Voltage – A tiny house water pump can utilize either 12-volt or 24-volt models. Higher voltage means high performance, but keep in mind that other parts of the tiny house also need power.
- Automated Pump Cycle – Pumps should be able to detect changes in the pressure to ensure seamless operation with constant management. The pump should automatically stop when the preset values are reached and start again when the pressure declines.
You should also consider the overall house plumbing system of the tiny house. Make sure that the pump is compatible with other parts of the grid such as the water tank, PVC pipes, and others.
How to Install a Water Pump
Get your new water pump up and running in no time with these six steps:
- Draining the Water Tank – Before installing the new pump, drain the water tank first by connecting a hose at its base and siphoning out the water. You can also save this water by directing it to pails or a large drum.
- Installing the New Pump – Secure the pump onto the tank using bolts. Proceed to connect the inlet and outlet hoses and secure them using clamps. Most pumps have arrows that indicate where the inlet and outlet are.
- Reconnecting Water and Electrical System – Attach the water tank to the pump. Ensure that it is fastened well to prevent any leak. Connect the necessary electric wirings to a power source.
- Testing the System – Turn on the power to check if the pump is working. Don’t panic if you hear a sound coming from the pump – it only means that the pump is on and working. If you don’t hear a sound, check all the electrical wirings to see if they are connected.
- Testing the Pump – After testing the system, check the pump for any leaks or holes. Fill the tank with water and turn on the pump to see if it works. Open a faucet to check if the pump can successfully deliver water to your tiny home. It will take a while for the water to run because the pump still fills the water lines before reaching the faucet.
Consider Using Water Pumps for Your Tiny House
Pumps are a great option for tiny homes that have their own house plumbing system. It can still provide the functionality of a traditional house by delivering usable water straight to the tap or faucet.
While some models can produce noise when turned on, it’s a small sacrifice in exchange for a constant supply of water. Several pumps are also incapable of producing hot water, so water heaters should be purchased separately.
Hey, there! We're Ivan and Manuela from Croatia, and we're crazy about tiny houses. We don't own one (yet).
This website is a result of our passion to share all the knowledge, photos, tips and tricks that we were able to learn while studying everything possible about the tiny house movement.